top of page
Search

Installing EnduraFlood Around Doors - Tutorial 160

  • Admin
  • Oct 23, 2022
  • 1 min read

Hello, and welcome to another EnduraFlood installation tutorial.


In this tutorial, we will discuss how to install EnduraFlood around doors or other similar vertical obstacles.

EnduraFlood wall panel installed beneath a door casing showing trim alignment and clearance around the door frame

Let’s get started. After the drywall has been removed, check that the door casing has sufficient support.


If needed, this is the time to add blocking behind the casing.


In this demonstration, we are using the UNI-TRIM profile, but you can also use any other horizontal EnduraFlood profile along the wall.


Installer attaching EnduraFlood trim and wall panel to exposed studs during door installation preparation

Install the trim and wall panels as you normally would.


The final vertical piece fitted to the panel is VERTI-COR/I, which finishes the panel closest to the door and fits cleanly against the casing.


Installer placing an EnduraFlood wall panel vertically next to a door opening before securing it in place

Now, repeat the process on the left side of the door.


Finished EnduraFlood wall panel installation around a door with panels installed evenly on both sides

Congratulations. You have just completed your first EnduraFlood installation around doors.



EnduraFlood. Waterproof wall panel systems for basements and other flood-prone areas.

 
 
bottom of page