The EnduraFlood UNI-BASE is a mounting and finishing trim for transition from wall ENDU-BOARD wall panels to the floor. UNI-BASE can also be used with common 0.42" cement boards. UNI-TRIM provides a decorative White PVC finish with a quarter-round top that is reminiscent of conventional baseboard trim made from wood or composite materials.
- Perfect for creating a transition from ENDURA-BOARD panels to floor
- Can also be used with common 0.42" cement board
- Allows for easy removal and re-use of the installed panels for inspection, or to allow the wall behind to dry out.
- Material: White PVC
EnduraFlood UNI-BASE, 95" long
Installation
UNI-BASE is installed using 8 x 1-3/4 cabinet screws that are counter sunk into the UNI-BASE and after drilling a pilot hole into the wooden stud. After UNI-BASE is cut to size, pilot drill 1/8" holes through UNI-BASE and the ENDU-BOARD into a wooden stud. Use a 3/8" drill to countersink holes into UNI-BASE. Mount UNI-BASE by screwing 8 x 3/4" cabinet screws through pilot holes into studs. Close 3/8" counter sink hole in UNI-BASE using 3/8" hole plugs.
Maintenance
UNIT-BASE does not require any special maintenance or care. UNIT-BASE can be cleaned using a wet cloth. If necessary clean in addition with neutral cleaning agents. Do not use abrasive cleaning agents and tools.
Length
95"
Information
Due to continuing improvements, actual product may differ slightly from images, drawings, and descriptions.