Search Results

Hello everyone, for some reason it looks like a previous thread about this same topic is not available so I cannot add this to that one. I did want to drop a follow-up note so others wouldn't go through what I did. I tried two different staplers and three different brands of staples trying to find one that would go through the TRIM pieces. The following two were not powerful enough to get through the TRIM board and the staples simply folded. I finally broke down and purchased what I think is the identical one used in the youtube videos and I'm happy to report it works GREAT. I view it as a good thing that the TRIM is so robust. It did take a few trips to the box stores to get the right tool so if you are going to DIY, just start with the one that works and save some time.

Working for a customer fixing hurricane damage and this is first time installing product. Looking for some advice on how to navigate this situation. The height for cut was right in line with where railing attaches. The panels dont appear to work next to stairs because I can’t get behind to install base-klips or baseboard to hold it in place. Also there is an outside corner to deal with where it meets stairs on other side. Rest of house was “easier” once I learned the product but this section has me stumped. Any thoughts?

Hi, I live on the Gulf Coast of Florida and was wondering what insulation to use behind EnduraFlood, I want something that won’t absorb water and still be fire resistant, I was going to use closed cell ridged foam boards with a 15 minute thermal barrier so I can just take it out clean and dry it after next flood, but the foam boards even with a thermal barrier still concerns me because they are highly combustible, is there a better way to insulate block walls?

I live on the Gulf in FL in an AE zone. My first floor is concrete block with flood vents. I would like to use Enduraflood for interior walls and butt the panels against the block walls, then paint the block walls. Should I use a corner piece at the end against the block walls to create a finished look?

Given the vertical pattern two Qs: 33” is the height from floor? Please confirm. What would be the drywall cut from floor in inches?

Should I seal the exposed cut of the drywall before installing the Raili gold trim, If so what product should I use?

When removing is it necessary to remove the wainscoting trim? ALSO,, has anyone come up with a method for numbering? It ilooks as if I will need to number panels, & baseboards!!!! Maybe some verticals? Maybe wainscoting trim IF IT NEEDS REMOVED.....

Do I need a vapor barrier with Endura Flood panels?

Did anyone have Enduraflood installed & then have surge waters rush through their home? (Rather than slowly rise inside.) If so, did the panels stay on the wall?